HO scale trackside dwarf signals with LEDs

HO scale trackside dwarf signals with operating LEDs.

More trackside signals >>> O scale S scale HO scale N scale

Ground level dwarf signals, HO scale

Custom Signals HO 3-color searchlight dwarf signal

• Tri-color LED, green, yellow, red
• Common anode (+) wiring
• Separate wire for each color for simple control
• Detailed casting, height: 0.45 inch (11mm)
• Weathered silver with black visor
• Current limiting resistor is attached
This 3-color signal can be operated by a TS2 train signal circuit.

CS HSW3 HO 3-color

Custom Signals HO 2-light dwarf signal

• Two LEDs

green over red, or
yellow over red, or
green over yellow.

• Common anode (+) wiring
• Height: 0.45 inch (11mm)
• Weathered silver with black visors
• Current limiting resistor is attached

Use a 2-LED signal to show the position of a track turnout.
Click here for slow motion switch machines.
Click here for 'snap' switch machines.

CS HW2G HO scale, green/red

CS HW2Y HO scale, yellow/red

Details West SG-947 HO 3-lamp dwarf signal

• Three LEDs, green, yellow, red
• Common anode (+) wiring
• Highly detailed casting
• Silver with black visors
• Overall height: 0.62 inch (16mm)
• #24 wire extensions are pre-attached for easier connections to your control circuit
• Current limiting resistor is included but not attached
This 3-light signal can be operated by a TS2 train signal circuit.

Details West HO 3-light dwarf with wires

Details West SG-947 3-LED ground signal, HO

Tomar HO 3-lamp dwarf signal • Three LEDs, green, yellow, red • Common anode (+) wiring • Overall height: 0.62 inch (16mm) • Black color • Current limiting resistors are not included This 3-light signal can be operated by a TS2 train signal circuit.		Tomar H-850 HO Tomar Industries photo
Tomar H-852, 2-light ground level dwarf signal • Two separate LEDs, green over red • Common anode (+) wiring • Height: 0.45 inches (11 mm) • Current limiting resistors are not included This signal can be operated in simple red-green mode with an Azatrax MRD1 or MRD8 infrared train detector. Click here for details.		Tomar H-852 HO dwarf signal
Use a 2-LED signal to show the position of a slow motion switch machine. Click here for an easy solution.

Block signals in other scales >>> O scale S scale N scale