|
|
|
|
S scale 1:64 block signals made by NJ International with operating LEDs.
|
S scale block signals from NJ International
NJI 4401 D-type block signal, 1:64 S scale
- Brass construction
- 3 LEDs - red, yellow, green
- Common anode (+) wiring
- Height: 3.25 inches (83 mm)
- Current limiting resistors are attached
This 3-light signal can be operated by a TS2 block signal circuit.
|
|
|
NJI 4314 B&O color position signal, 1:64 S scale
- Brass construction
- 7 LEDs - 2 red, 2 yellow, 2 green, 1 white marker
- Common anode (+) wiring
- Height: 4.5 inches (11.5 cm)
- Current limiting resistors are attached
This B&O signal can be operated by a TS2 block signal circuit.
|
|
|
NJI 4345 SA type target signal, 1:64 S scale
- Brass construction
- One 2-color LED, red & green
- Illuminate red & green together to simulate yellow (sort of)
Note: Combining red and green to make yellow is a subjective experience. We recommend experimenting with one signal before investing in multiple signals.
- Common anode (+) wiring
- Height: 3 inches (76 mm)
- Current limiting resistors are attached
Operate this signal in simple red-green mode with an MRD1 or MRD8 infrared train detector, or,
operate multiple signals in three-color mode with a TS2 train signal circuit.
|
|
|
© copyright 2009-2023 Azatrax LLC, Longmont, Colorado
|
|